Product Details:
Payment & Shipping Terms:
|
Model: | ASli | Temperature: | -70°C ~+150°C(200 °C Optional) |
---|---|---|---|
Humidity: | 20%~98%R.H (5%~98%R.H Optional) | Temp. Analytic Accuracy: | 0.1°C |
Temp. Distribution Uniformity: | +/-2.0°C | Humi.analytic Accuracy: | 0.1% R.H |
Humi.distribution Uniformity: | +/- 3.0% R.H | Temp. Rising Rate: | 3.0°C/min (customized) |
Temp.Falling Rate: | 1.2°C/min(customized) | Material: | SUS 304# Stainless Steel |
Compressor: | French Tecumseh, Germany | Power: | 220V / 380V |
High Light: | temperature and humidity chamber,humidity and temperature controlled chamber |
(Double 85 Test) High Temperature &High Humidity Test Chamber for PV modules test
No. | Test Name | Test Purposes | Equipment Name | Equipment Model | Main Technical Parameters | Brand |
1 | Damp Heat Test (Double 85 Test) |
To determine the ability of the module to withstand the effects of long-term penetration of humidity. | (Double 85 Test) High Temperature &High Humidity Test Chamber |
Test Requirement: Method:Put the modules into the chamber according national standard and IEC61215UL1703,Test Temperature 85 ± 2 ℃,Test Humidity 85% ± 5%,Test Time 1000h or 3000H. |
ASLi | |
2 | Humidity-Freeze Test | The purpose of this test is to determine the ability of the module to withstand the effects of high temperature and humidity followed by sub-zero temperatures. This is not a thermal shock test |
(Humidity-freeze Thermal Cycling Test) High-low Temperature Humidity Test Chamber |
Test Requirement: Method:Put the modules into the chamber accoring to national standard andIEC61215UL1703,Test Temperature 85 ± 2 ℃,Test Humidity 85% ± 5%,Test time 20h ,then test under -40 ℃ for0.5h ,10times cycling ;which the temperature rising and falling speed requires:100℃or 200℃/H . |
ASLi | |
3 | Thermal Cycling Test | To determine the ability of the module to withstand thermal mismatch, fatigue and other stresses caused by repeated changes of temperature. |
High-Low Temperature Cycling Chamber | Test Requirement: Method:Put the specimen into the chamber according to national standard and IEC61215UL1703,Test Temperature-40 ℃,Test time 10M ,then under 85 ± 2 ℃for 10M ,continuously 200 times cycle,in which temperature rise/fall speed requires 100℃/H . |
ASLi | |
4 | UV Preconditioning Test | To precondition the module with ultra-violet (UV) radiation before the thermal cycle/ humidity freeze tests to identify those materials and adhesive bonds that are susceptible to UV degradation | UV Aging Test Chamber | Test Requirement: Method: Put the specimens into the UV aging chamber according national standard and IEC61215UL1703,using 340nm wavelength UV for component and raw materialradiation. |
ASLi | |
5 | Corrosion Test | To determine the module ability to withstand corrosion | Salt Spray Test Chamber | Test Requirement: Method: Put the specimens in the salt spray chamber according to national standard and IEC61215UL1703:Temeprature setting : saturated air barrel: 47℃(+/-)1℃ ; Testing room:35℃(+/-)1℃; Angle 35°. |
ASLi | |
6 | Hot Spot Endurance Test | To determine the ability of the module to withstand hot-spot heating effects, for example solder melting or deterioration of the encapsulation | Xenon Light Aging Test Chamber | Test Requirement: Method: Put the specimen into the xenon aging test chamber accoring to national standard and IEC61215UL1703:Temperature +25℃~+85℃;Wave Range:295-780nm;Humidity 45%~98% ; Rain Pressure 80~120KPA ; Testing Time 300H . |
ASLi |
Contact Person: Doris
Tel: 0086-13602389184
-70 to +150 Degree Climate Temperature Humidity Test Chamber Price
Walk-In Climate Test Chamber For Low High Temperature And Humidity Testing
HL-225-F High And Low Temperature Cycle Test Chamber Has Cyclical System
Walk-in Temperature Humidity Testing Room, Environmental Walk-in Chamber
Customized Walk In Climatic Test Chamber Environmental Test Equipment
20% - 98% Rh Walk In Climatic Stability Chamber Electronic For Auto Spare Parts
Sunshine Simulation Uv / Xenon Aging Room Walk In Stability Chamber For Color Fastness Test
Vertical Type Sine Shock Vibration Temperature Humidity Test Chamber
Electromagnetic Horizontal X / Y Axle vibration Test System 20 Kn Exiting Force
350000N Max Sine Force Vibration Measuring Instruments / Vibration Analysis Equipment
5 - 2000hz Vibration Test System 20kn Force With Vertical Horizontal Bench